You refilled cartridges, replaced the chips and the device still doesn’t work? The article is about causes and possible solutions of the problem.
Devices for different regions are supplied to the market. Official supply – region 2. Illegel “gray” supply – regions 1 and 3. Therefore, if you have printer for 2 region and you bought cartridges for 3, they won’t be in operation and corresponding message will be displayed on the screen. The same situation is with cartridges refill. It’s imperative to set the chip with corresponding region ortherwise the printer won’t operate. Continue reading Problems with refill and new cartridges for Xerox Phaser 6000, 6010 and WorkCentre 6015. How to find out the region number.→
The life of a Brother drum cartridge is limited, so at some point you will have to replace it. The device won’t forget to notify you about that «festal» occasion.
Often you replace the drum, throw away the package, but the device is still asking you to “replace the drum”. So what to do? The answer for that question hides in that box, where you would find the instruction on how to replace the drum and reset the drum counter. Never say die, the following information will help you with resetting the Brothers’ drum. Continue reading Brother reset (drum counter reset)→
The cartridge is full, but on the indicator there’s the message “no toner”? What to do? How to be? In this small article we will tell you how to solve this problem.
In devices of these series reset of the message “no toner” is performed by installation of a new fuse in a special groove on a cartridge. The rating of a fuse has to be about 63 мА. At the time of installation of a cartridge with a new fuse, the device finds it, “burns through” and makes reset of the internal counter of pages. Everything is simple and banal. More complicated things begin further. To find a fuse of such rating in sale is quite difficult, and those that you can find not always correspond to rating. And it is the biggest problem. At installation of a fuse of bigger rating, the device can’t “burn through” a fuse and starts swearing on faulty “CRUM”.